News:
Phone:+86 20 36888000

 

HY-H1GOS-Basic

HY-H1GOS-Basic
                                  HY-H1GOS 1KW Wind Solar Hybrid Off -grid System
 
System Configuration:
  • Wind Power: 600W rated power output - HY-600 Wind turbine, 24V
  • Solar Power: 400W rated power output - 2pcs 200W 24V polycrystalline solar panel
  • Controller & Inverter: off-grid wind solar hybrid controller inverter 600W
●   Wall fixation tower 3 meter tower for 600w wind turbine
●   Rooftop solar panel installation bracket for 400W PV
 
 
Estimated System Yearly Power Production(KWH) - solar & wind combined
 
Remarks: solar power production is estimated based on areas with class II solar resources (yearly sunshine 3000-3200hrs, radiation level 6570-7621MJ/㎡), wind power production is estimated based on annual average wind speed at 10 meter high free-standing tower installation, you may input your project site latitude & longitude at following website, so you can get more accurate figure of your local wind and solar resources.
http://www.gaisma.com/en/
http://eosweb.larc.nasa.gov/sse/RETScreen/
 
Recommended Application:
Simple cottage with 1-2 bedroom, providing very basic power for total load less than 600W. 
  • Ideal solution for areas with stable public grid supply to reduce your electricity bill. 
  • Ideal solution for areas with unstable public grid supply as a reliable power backup system. 
  • Areas completely without public grid supply, HY-H1GOS system could serve as a stand-alone power supply system, such as remote area or holiday cottage.
 
System Installation Requirement:
●  Rooftop solar panel installation requires minimum 3 square meters, south-facing steep roof is recommended for better solar power harvesting.
●  Open space without tall obstacle is preferred for wind turbine installation for better wind power harvesting.
●  1-2 square meter space is preferred to place controller inverter system and batter bank.
 
 
 
System Specification:
 
System Detail HY-H1GOS-Basic
Rated Capacity 1000W
Wind turbine HY-600 24V, 5 blade
PV modules 200W (24V) x 2
Wind Solar Hybrid off-grid controller Inverter input: 600W wind/400W solar 
Output: 600W 110-240Vac 50/60hz
Grid by-pass switch: optional 
Deep Cycle battery AGM gel 150AH x 2
PV module mounting bracket flat roof/tile roof/corrugated Metallic roof/ground mount
Suggested Tower installation HY-WF10 (3m) for wall fixation installation
HY-FRK10 (4m) for flat roof installation
HY-HT15-10.4P3 hydraulic tower 10.4 meters
 
 
Recommended household electric applicance - HY-H1GOS-Basic
Remarks:
1. System inverter is designed with total capacity 600W, which means total load capacity of the house should be no more than 600W, inverter will automatically shut down if instant load over 600W for system self-protection, so we suggest end user estimate your own house total load capacity then select the proper inverter system.
2. Above household daily power consumption is calculated based on a typical usage of an ordinary household for end user reference only.
3. Air conditioner is not recommended for this system because air conditioner is a high power consumption unit which consumes 5-8KWH, if the house has to be equipped with air conditioner, we suggest supply the power for air conditioner from public grid.
4. There is an optional by-pass switch which could automatically switch to public grid power when there is not enough power in battery bank, this is only applicable to the area with public grid connection.